DOUBLE POINTS WEEKEND: Earn 2X Onnit X Points on purchases March 29th-31st! DOUBLE POINTS WEEKEND: Earn 2X Onnit X Points on purchases March 29th-31st! SHOP NOW
Key Tips to Performing the Kettlebell Jerk Correctly

How to Do the Kettlebell Jerk Correctly

Written by
August 6, 2015
Updated March 27, 2020

The Kettlebell Jerk is an excellent full body exercise that requires a high degree of coordination, timing, and the ability to generate maximum power in a short range of motion. Although it can be used for developing maximal strength, this movement is best suited for “work capacity,” or the ability to be strong, fast, and explosive over longer durations.

Along with the Long Cycle (also called Clean & Jerk) and Snatch, the Jerk is one of the primary events in Kettlebell Sport competition. It is most commonly coupled with the Snatch in the Biathlon event. In competition, athletes lift for five or ten minute sets for as many reps as possible with technical proficiency without putting the kdettlebells down.

Kettlebell Jerk Technique

The Jerk Has 5 Primary Technique Components:

1. Half Squat
2. Bump
3. Undersquat
4. Stand to Lockout/Fixation
5. Drop to Rack Position

Rack

Kettlebell Jerk Rack

Ideally, the elbows are resting directly on the hips (iliac crests), knees are locked, pelvis is forward, torso deflected back, and the thoracic spine is curved. However, nuances of an individuals rack position will differ depending on body type. The primary goal is rest and connection between arms/torso.

Half Squat

Kettlebell Half Squat

While keeping the pelvis forward, drop into a shallow knee bend. Two important points here are to first, “drop/fall” into the Half Squat to activate a stretch reflex instead of descending slowly. Second, maintain connectivity between the elbows to torso and heels to ground. This maximizes power transfer from the lower body to the upper body and arms.

Bump

Kettlebell Jerk Bump

This involves what is termed a “quadruple extension.” The ankles, knees, hips, and torso all extend during this movement. The final position involves the hips being up/ forward and the shoulders being down/back. The degree of energy a competitor puts into this part of the movement is dependent on their body type, athletic attributes, etc.

Undersquat

Kettlebell Jerk Undersquat

To maximize efficiency, the arms are locked by dropping down into a squatting posture instead of pressing up. The depth of the Undersquat is dependent on the person’s anatomy and conditioning. Those with strong legs and elbow extensors may drop deeper. Lighter competitors, whose primary advantage is speed, may tend to use a shallow Undersquat. The key is to pick a movement strategy that conserves energy and keeps the heart rate low. This allows for more repetitions and longer duration.

Stand to Lockout

Stand to Lockout

There are two primary movement mechanics to accomplish this. First, simply stand up to the overhead posture. Second, the competitor can use a “knee roll” which involves keeping the hips at the level of the Undersquat and only rolling the knees backward to lockout. Thus, there is no true level change which is less work and more efficient. In addition, the anterior pelvic tilt this mechanic creates relaxes the quadriceps. Again, this conserves energy which equals better performance.

Drop to the Rack Position

The triceps are turned “off” and the bells are lowered to the rack position via a controlled drop. The force of the bells coming down is absorbed by raising up on the heels and bringing the chest toward the bells. As the elbows begin to land in the rack position, the heels are lowered and the thoracic spine rounded to safely diffuse the load. The knees may be bent slightly as well. The key is timing the bell to body contact with the shock absorption mechanics.

Breathing

Exhale during the Half Squat, inhale on the bump, exhale upon landing into the Undersquat/stand to lockout, additional breathing cycle in the top position, inhale at the beginning of the drop, exhale as the elbows make contact into the rack. From there, most competitors will take recovery breaths in the rack. If a deep Undersquat is used, then exhale upon landing into the Undersquat, inhale during the stand to lockout; perform an additional breathing cycle in the top position, inhale at the beginning of the drop, and finally exhale as the elbows make contact into the rack. Some competitors will also use lockout/fixated position for recovery breathing.

Common Errors

loading...

1. Lack of connection between the elbow/hips and the heel/floor when descending into the Half Squat.
2. Descending too slowly when dropping into the Half Squat which negates the desired stretch reflex.
3. Pressing to lockout instead of dropping to the Undersquat to lock the arms.
4. “Posing” – slow transition from the Undersquat to lockout which fatigues legs and arms.
5. Not relaxing enough and being too tense, which decreases efficiency, increases heart rate, and decreases performance.

 

The Kettlebell Jerk

An all around fitness and martial arts training expert, Ken Blackburn is the Head Master Trainer International Team Leader and Director of Kettlebell Sport Competitions for the IKFF (International Kettlebell and Fitness Federation) In this role, Ken travels all over the US and internationally teaching strength and conditioning workshops, the very popular IKFF CKT (Certified Kettlebell Teacher) course and hosting the most well attended kettlebell sport competitions in North America. Ken is also one of the top American kettlebell competitors and is the North American Record Holder in the Chair Press.
Free shipping is offered on orders with a minimum subtotal of $100 less discounts. Free shipping is only available in the contiguous U.S. and excludes Fitness and Digital items.
For media inquiries please contact us at media@onnit.com.
With a subscription, you'll get your favorite Onnit products whenever you want at 15% off MSRP. All automatic, worry free, and with our same great money back guarantee.
Cancel or adjust your order at any time, hassle free. Your payment method will only be charged right before your order ships. The discount applied every time is 15% off MSRP or the current sale discount, whichever is greater. For more information, see the complete Onnit Subscription Terms & Conditions and Frequently Asked Questions.

Secure Shopping

We implement a variety of security measures to maintain the safety of your personal information when you place an order or enter, submit, or access any information on our website. We incorporate physical, electronic, and administrative procedures to safeguard the confidentiality of your personal information, including Secure Sockets Layer (SSL) for the encryption of all financial transactions through the website. We use industry-standard, 256bit SSL encryption to protect your personal information online, and we also take several steps to protect your personal information in our facilities. For example, when you visit the website, you access servers that are kept in a secure physical environment, behind a locked cage and a hardware firewall. After a transaction, your credit card information is not stored on our servers.